Removal Procedure

2004 Oldsmobile Bravada AWDSECTION Removal Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. The sunroof glass panel must be in the closed position.
  2. Remove the headliner. Refer to HEADLINER REPLACEMENT .
  3. Remove the sunroof glass panel. Refer to Sunroof Glass Panel Replacement .
  4. Remove the drain channel. Refer to Roof Drain Channel Replacement .
  5. Remove the sunshade. Refer to Sunroof Sunshade Panel Replacement .
  6. Fig 1: Power Sunroof Module
    GM582982Courtesy of GENERAL MOTORS CORP.
  7. Remove the 9 bolts retaining the module to the roof.
  8. Remove the module from the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.