SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1620 (ENGINE MECHANICAL - 3.8L)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS

Application Specifications
Metric English
Accelerator Control Cable Bracket Bolt/Nut 16 N.m 12 lb ft
Air Conditioner Compressor Bracket Bolt 50 N.m 37 lb ft
Air Conditioner Compressor Nut 30 N.m 22 lb ft
Balance Shaft Driven Gear Bolt
First Pass 22 N.m 16 lb ft
Final Pass 70 degrees
Balance Shaft Retainer Bolt 30 N.m 22 lb ft
Camshaft Position Sensor Bolt 10 N.m 89 lb in
Camshaft Sprocket Bolt
First Pass 100 N.m 74 lb ft
Final Pass 90 degrees
Camshaft Thrust Plate Bolt 15 N.m 11 lb ft
Canister Purge Solenoid Valve Bracket Bolt 50 N.m 37 lb ft
Canister Purge Vacuum Switch Bolt 50 N.m 37 lb ft
Connecting Rod Bearing Cap Bolts
First Pass 27 N.m 20 lb ft
Final Pass 50 degrees
Crankshaft Balancer Bolt
First Pass 150 N.m 111 lb ft
Final Pass 76 degrees
Crankshaft Main Bearing Cap Bolt
First Pass 40 N.m 30 lb ft
Final Pass 110 degrees
Crankshaft Main Bearing Cap Bolt - Side
First Pass 15 N.m 11 lb ft
Final Pass 45 degrees
Crankshaft Position Sensor Stud 30 N.m 22 lb ft
Crankshaft Rear Oil Seal Housing Bolt
First Pass 15 N.m 11 lb ft
Final Pass 50 degrees
Cylinder Head Bolt
First Pass 50 N.m 37 lb ft
Final Pass 120 degrees
Drive Belt Tensioner Bolt/Nut 50 N.m 37 lb ft
Drive Belt Tensioner Bracket Stud 17 N.m 12 lb ft
EGR Valve Adapter to Cylinder Head Bolt/Stud 50 N.m 37 lb ft
EGR Valve Inlet Pipe to Exhaust Manifold Bolt 29 N.m 21 lb ft
EGR Valve Nut 29 N.m 21 lb ft
EGR Valve Outlet Pipe Bolt/Nut 29 N.m 21 lb ft
EGR Valve Wiring Harness Heat Shield Bolt/Nut 10 N.m 89 lb in
Engine Coolant Temperature Sensor 25 N.m 18 lb ft
Engine Flywheel Bolt
First Pass 15 N.m 11 lb ft
Final Pass 50 degrees
Engine Front Cover Bolt/Stud
First Pass 20 N.m 15 lb ft
Final Pass 40 degrees
Engine Lift Bracket Bolt/Nut/Stud 30 N.m 22 lb ft
Engine Mount Nut, Lower 78 N.m 58 lb ft
Engine Mount Nut, Upper 78 N.m 58 lb ft
Engine Mount Strut Bracket Bolts 28 N.m 21 lb ft
Engine Mount Strut Bracket Bolt - Lower 50 N.m 37 lb ft
Engine Mount Strut Bracket Bolts - to the Cylinder Head 50 N.m 37 lb ft
Engine Mount Strut Bracket Nut - Lower 30 N.m 22 lb ft
Engine Mount Strut Nut 48 N.m 35 lb ft
Engine to Transaxle Bolt/Stud 75 N.m 55 lb ft
Engine Wiring Harness Heat Shield Bolt/Nut 10 N.m 89 lb in
Exhaust Manifold Bolt/Nut 30 N.m 22 lb ft
Exhaust Manifold Heat Shield Nut 20 N.m 15 lb ft
Exhaust Manifold Stud 10 N.m 89 lb in
Fuel Injector Rail Assembly Nut 10 N.m 89 lb in
Fuel Injector Rail Stud 25 N.m 18 lb ft
Fuel Injector Sight Shield Bracket Nut 30 N.m 22 lb ft
Generator Brace Bracket Bolt 50 N.m 37 lb ft
Generator Bracket Bolt 50 N.m 37 lb ft
Heated Oxygen Sensor 42 N.m 31 lb ft
Heated Inlet Pipe Nut 25 N.m 18 lb ft
Idler Pulley Bolt 50 N.m 37 lb ft
Idler Pulley Bracket Bolt 30 N.m 22 lb ft
Ignition Control Module Assembly Bracket Bolt 30 N.m 22 lb ft
Ignition Control Module Assembly Bracket Nut 50 N.m 37 lb ft
Ignition Control Module Assembly Nut 8 N.m 71 lb in
Ignition Control Module Bracket Stud 17 N.m 12 lb ft
Knock Sensor 18 N.m 13 lb ft
Lower Intake Manifold Bolt 15 N.m 11 lb ft
MAP Sensor Bolt 3 N.m 22 lb in
MAP Sensor Bracket Bolt 30 N.m 22 lb ft
Oil Filter 30 N.m 22 lb ft
Oil Filter Adapter Bolt
First Pass 15 N.m 11 lb ft
Final Pass 50 degrees
Oil Gallery Plug 30 N.m 22 lb ft
Oil Level Indicator Tube Stud/Nut 19 N.m 14 lb ft
Oil Level Sensor Bolt 20 N.m 15 lb ft
Oil Pan Bolt 14 N.m 125 lb in
Oil Pan Drain Plug 30 N.m 22 lb ft
Oil Pressure Sensor 16 N.m 12 lb ft
Oil Pump Cover Screw 11 N.m 98 lb in
Oil Pump Pipe and Screen Bolt 15 N.m 11 lb ft
Power Steering Pump Bolt 34 N.m 25 lb ft
Positive Battery Cable Terminal Bolt 15 N.m 11 lb ft
Spark Plug - Initial Installation 27 N.m 20 lb ft
Spark Plug - Reinstallation 15 N.m 11 lb ft
Starter Motor Heat Shield Bolt 30 N.m 22 lb ft
Supercharger Bolt/Stud - L67 23 N.m 17 lb ft
Supercharger Bypass Valve and Fuel Pressure Regulator Valve Harness Bolt 10 N.m 89 lb in
Supercharger Bypass Valve Nut 8 N.m 71 lb in
Supercharger Oil Plug 10 N.m 89 lb in
Throttle Body Bolt/Nut 10 N.m 89 lb in
Throttle Body Support Bolt 16 N.m 12 lb ft
Timing Chain Dampener Bolt 22 N.m 16 lb ft
Upper Intake Manifold Bolt 10 N.m 89 lb in
Vacuum Solenoid Valve Bolt (with NC8 California Emissions) 10 N.m 89 lb in
Valve Lifter Guide Retainer Bolt 30 N.m 22 lb ft
Valve Rocker Arm Bolt
First Pass 15 N.m 11 lb ft
Final Pass 90 degrees
Valve Rocker Arm Cover Bolt 10 N.m 89 lb in
Water Outlet Housing Bolt 27 N.m 20 lb ft
Water Pump Bolt
Large Bolt 34 N.m 25 lb ft
Small Bolt 22 N.m 16 lb ft
Water Pump Pulley Bolt 13 N.m 116 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.