Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1590 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Armrest Mounting Screw | 2 N.m | 18 lb in |
| Check Strap Bolt | 24 N.m | 18 lb ft |
| Check Strap Nuts | 24 N.m | 18 lb ft |
| Clevis Bolt | 24 N.m | 18 lb ft |
| Door Hinge Bolt | 24 N.m | 18 lb ft |
| Door Lock and Actuator Assembly Mounting Bolt | 9 N.m | 80 lb in |
| Door Striker Bolt | 24 N.m | 18 lb ft |
| Inside Door Handle Mounting Bolt | 9 N.m | 80 lb in |
| Outside Door Handle Mounting Bolt | 9 N.m | 80 lb in |
| Outside Rearview Mirror Retaining Nut | 9 N.m | 80 lb in |
| Side Access Door Inside Handle Nut | 9 N.m | 80 lb in |
| Side Access Door Latch Bolt | 9 N.m | 80 lb ft |
| Side Access Door Latch Control | 9 N.m | 80 lb in |
| Side Access Door Lower Striker Bolt | 24 N.m | 18 lb ft |
| Side Access Door Upper Striker Bolt | 24 N.m | 18 lb ft |
| Side Door Inside Handle Nut | 9 N.m | 80 lb in |
| Window Glass Retaining Bolt | 2 N.m | 18 lb in |
| Window Run Channel Bolt | 9 N.m | 80 lb in |
| Window to Regulator Bolt | 9 N.m | 80 lb in |
| Window Sash Channel Bolt | 6 N.m | 53 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.