Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 154 (AIR BAG RESTRAINT SYSTEMS)
2004 Oldsmobile Bravada AWD
Section 154 (Air Bag Restraint Systems)
2004 Oldsmobile Bravada AWDSECTION Section 154 (Air Bag Restraint Systems)
WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Description & Operation
- Component Locations
- System Operation Check
- Air Bag Safety Precautions
- Adjustments
- Disabling & Activating Air Bag System
- Disposal Procedures
- Post-Collision Inspection
- Removal & Installation
- Diagnostics
- Diagnostic Tests
- Notes
- Air Bag Warning Light Does Not Come On
- DTC B0016: Passenger Frontal Deployment Loop Resistance Low
- DTC B0017: Passenger Frontal Deployment Loop Open
- DTC B0018: Passenger Frontal Deployment Loop Voltage Out Of Range
- DTC B0022: Driver Frontal Deployment Loop Resistance Low
- DTC B0024: Driver Frontal Deployment Loop Voltage Out Of Range
- DTC B0026: Driver Frontal Deployment Loop Open
- DTC B0028: Passenger Head Impact Air Bag Deployment Loop Resistance Low
- DTC B0029: Passenger Head Impact Air Bag Deployment Loop Open
- DTC B0030: Passenger Head Impact Air Bag Deployment Loop Voltage Out Of Range
- DTC B0040: Driver Head Impact Air Bag Deployment Loop Resistance Low
- DTC B0041: Driver Head Impact Air Bag Deployment Loop Open
- DTC B0045: Driver Head Impact Air Bag Deployment Loop Voltage Out Of Range
- DTC B0051: Deployment Commanded
- DTC B0053: Deployment Commanded With Loop Malfunction
- DTC B0077: Driver Sis Malfunction
- DTC B0078: Passenger Sis Malfunction
- DTC B0079: Incorrect Driver Sis Installed
- DTC B0080: Discard Driver Sis
- DTC B0081: Incorrect Passenger Sis Installed
- DTC B0082: Discard Passenger Sis
- DTC B1000: Internal SDM Fault
- DTC B1001: Option Configuration Error
- Wire Repair
- Torque Specifications
- Wiring Diagrams
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.