SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1539 (BODY REAR END)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specification

Application Specification
Metric English
Bellcrank Screws 0.675 N.m 6 lb in
License Plate Pocket Screws 5 N.m 44 lb in
Liftgate Bumper Bolts 25 N.m 18 lb ft
Liftgate Control Module Screws 10 N.m 89 lb in
Liftgate Hinge Nuts 20 N.m 15 lb ft
Liftgate Latch/Lock Assembly Screws 10 N.m 89 lb in
Liftgate Lock Actuator Screws 0.75 N.m 6 lb in
Liftgate Striker Bolts 25 N.m 15 lb ft
Liftgate Window Latch Screws 10 N.m 89 lb in
Pullstrap Screw 4 N.m 35 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.