Torque Specifications

2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2002 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Front seat bolts 26 (35)
Steering wheel nut 30 (41)
INCH Lbs. (N.m) 
Side impact air bag module nuts 80 (9.0)
Heater & A/C control assembly screws 16 (1.8)
Instrument Panel Cluster (IPC) mounting bolts 14 (1.6)
Lower steering column cover screws 31 (3.5)
Passenger-side air bag module bolts 80 (9.0)
Radio screws 16 (1.8)
Sensing & Diagnostic Module (SDM) bolts 80 (9.0)
Side Impact Sensor (SIS) bolts 80 (9.0)
Upper steering column cover Torx screw 13 (1.5)
Upper trim pad screws 18 (2.0)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.