Engine Block - Rear View

2004 Oldsmobile Bravada AWDSECTION Engine Block - Rear View
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Block Bolt Holes Component View - Rear View
GM64590Courtesy of GENERAL MOTORS CORP.
Engine Block - Rear View

Hole Thread Size Insert Drill Counterbore Tool Tap Driver Drill Depth - Maximum mm (in) Tap Depth - Maximum mm (in)
1 M10 x 1.5 J 42385-215 J 42385-211 J 42385-212 J 42385-213 J 42385-214 27.0 (1.06) 21.5 (0.846)
2-4 M8 x 1.25 J 42385-210 J 42385-206 J 42385-207 J 42385-208 J 42385-209 22.5 (0.885) 17.5 (0.688)
5-6 M10 x 1.5 J 42385-215 J 42385-211 J 42385-212 J 42385-213 J 42385-214 27.0 (1.06) 21.5 (0.846)
7-13 M8 x 1.25 J 42385-210 J 42385-206 J 42385-207 J 42385-208 J 42385-209 22.5 (0.885) 17.5 (0.688)
14-16 M10 x 1.5 J 42385-215 J 42385-211 J 42385-212 J 42385-213 J 42385-214 27.0 (1.06) 21.5 (0.846)
17-18 M8 x 1.25 J 42385-210 J 42385-206 J 42385-207 J 42385-208 J 42385-209 22.5 (0.885) 17.5 (0.688)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.