Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Antenna Ground Stud 5 N.m 44 lb in
Antenna Ground Stud Nut 6 N.m 53 lb in
Fascia to Quarter Panel Bolts 5 N.m 44 lb in
Fuel Filler Door Bolt 2 N.m 18 lb in
Fuel Filler Door Release Cable Jam Nut 2 N.m 18 lb in
Fuel Filler Door Release Cable Nut 3 N.m 27 lb in
Fuel Filler Door Release Actuator Nut 2 N.m 18 lb in
Fuel Filler Door to Quarter Panel Screws 2 N.m 18 lb in
Fuel Filler Pipe Screws 3 N.m 27 lb in
Fuel Filler Pocket Screws 2 N.m 18 lb in
Hinge Bolts 25 N.m 18 lb ft
Hinge Nuts 25 N.m 18 lb ft
Latch Bracket Mounting Bolts 10 N.m 89 lb in
Latch Bracket Mounting Nuts 10 N.m 89 lb in
Latch Mounting Bolts 10 N.m 89 lb in
Lift Window Hinge Bolts 25 N.m 18 lb ft
Lift Window Hinge Nuts 25 N.m 18 lb ft
Lift Window Latch Striker Bolts 10 N.m 89 lb in
Lock Pillar Weatherstrip Retainer Screws 3 N.m 27 lb in
Quarter Panel Brace-to-Rear Floor Nuts 10 N.m 89 lb in
Quarter Panel Door Lock Pillar Screws 3 N.m 27 lb in
Quarter Panel-to-Fascia Nuts 10 N.m 89 lb in
Quarter Panel-to-Floor Brace Bolts 5 N.m 44 lb in
Quarter Panel-to-Rear Compartment Brace Bolts 5 N.m 44 lb in
Quarter Panel Upper Flange Screws 3 N.m 27 lb in
Rear Compartment Brace to Floor Nuts 10 N.m 89 lb in
Rear Compartment Hinge to Body Bolts 25 N.m 18 lb ft
Rear Compartment Hinge to Lid Bolts 31 N.m 23 lb ft
Rear Compartment Lid Hinge Bolts 25 N.m 18 lb ft
Rear Compartment Lid Latch Bolts 10 N.m 89 lb in
Rear Compartment Lid Latch Striker Bolts 10 N.m 89 lb in
Rear Weatherstrip Upper Corner Screws 4 N.m 36 lb in
Rear Wheelhouse Liner Bolts 2 N.m 18 lb in
Release Cable Nut 2 N.m 18 lb in
Roof Weatherstrip Center Retainer Screws 3 N.m 27 lb in
Roof Weatherstrip Retainer Screws 3 N.m 27 lb in
Roof Weatherstrip Upper Corner Screws 3 N.m 27 lb in
Seat Belt Guide Bolt 46 N.m 34 lb ft
Tail Lamp Mounting Screws 2 N.m 18 lb in
Wheelhouse Liner Panel Bolts 2 N.m 18 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.