Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1467 (BODY REAR END)REPAIR INSTRUCTIONSWEATHERSTRIP RETAINER REPLACEMENTREMOVAL PROCEDURE

2004 Oldsmobile Bravada AWD

Removal Procedure

2004 Oldsmobile Bravada AWDSECTION Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Weatherstrip At Lock Pillar Retainer

Courtesy of GENERAL MOTORS CORP.

Remove the push-in retainer securing the lower end of the weatherstrip to the lock pillar.
Remove the door opening weatherstrip from the lock pillar retainer
Remove the door opening weatherstrip from the roof retainer from the lock pillar to the windshield.

Fig 2: Lock Pillar Retainer & Screws

Courtesy of GENERAL MOTORS CORP.

Remove the screws securing the lock pillar retainer.
Remove the lock pillar retainer.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.