Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Door Control Module Screws 3 N.m 27 lb in
Door Hinge to Door Bolts 30 N.m 22 lb ft
Door Hinge to Hinge Pillar Bolts 30 N.m 22 lb ft
Door Lock Screws 10 N.m 89 lb in
Door Lock Striker Screws 24 N.m 18 lb ft
Door Speaker Assembly Screws 3 N.m 27lb in
Inside Handle Screw 5 N.m 44 lb in
Mirror Nuts 10 N.m 89 lb in
Outside Door Handle Bolts 8 N.m 70 lb in
Pull Handle Screws 6 N.m 53 lb in
Seat Belt Guide Nut 40 N.m 29 lb ft
Window Outer Sealing Strip Screw 2 N.m 18lb in
Window Regulator Channel Stud Nuts 10 N.m 89 lb in
Window Regulator Motor Nuts 10 N.m 89 lb in
Window Regulator Window Clamp Bolts 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.