Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1459 (CAUTIONS AND NOTICES)
2004 Oldsmobile Bravada AWD
Section 1459 (Cautions And Notices)
2004 Oldsmobile Bravada AWDSECTION Section 1459 (Cautions And Notices)
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Introduction
- Definition of Caution, Notice, and Important
- ABS Component Handling Caution
- Actions to Take When Working with Fuel Caution
- Approved Equipment for Collision Repair Caution
- Assistant Driving Caution
- Batteries Produce Explosive Gases Caution
- Battery Disconnect Caution
- Brake Dust Caution
- Brake Fluid Irritant Caution
- Breathing R-134a Caution
- Checking Hot Transmission Fluid through Drain Plug Hole Caution
- Clutch Dust Caution
- Collision Sectioning Caution
- Defroster Outlet Caution
- Electric Coolant Fan Caution
- Exhaust Service Caution
- Express Down Feature Caution
- Eye Protection Caution
- Fuel and EVAP Pipe Caution
- Fuel Gage Leak Caution
- Fuel Pipe Fitting Caution
- Fuel Rail Stop Bracket Installation Caution
- Fuel Storage Caution
- Fuel Vapors in Evaporative Emission (EVAP) Components Caution
- Gasoline/Gasoline Vapors Caution
- Glass and Sheet Metal Handling Caution
- Halogen Bulb Caution
- Hood Hold-Open Device Caution
- Hot Exhaust System Caution
- Lower O-Ring Removal Caution
- Moving Parts and Hot Surfaces Caution
- Protective Goggles and Glove Caution
- Radiator Cap Removal Caution
- Relieving Fuel Pressure Caution
- Road Test Caution
- Safety Glasses Caution
- Safety Glasses and Compressed Air Caution
- Safety Goggles and Fuel Caution
- SIR Caution
- SIR Deployed Inflator Modules Are Hot Caution
- SIR Inflator Module Coil Caution
- SIR Inflatable Module Deployment Outside Vehicle Caution
- SIR Inflator Module Disposal Caution
- SIR Inflator Module Handling and Storage Caution
- SIR Special Tool Caution
- Sound Deadener Foam in the Lock Striker Pillars Caution
- Tilt Spring Caution
- Vehicle Lifting Caution
- Window Retention Caution
- Work Stall Test Caution
- Air in the Power Steering System Notice
- Anti-Corrosion Materials Notice
- Apply Tape When Removing Body Panel Notice
- Belt Dressing Notice
- Brake Caliper Notice
- Brake Fluid Damage to Electrical Connections Notice
- Brake Fluid Effects on Paint and Electrical Components Notice
- Catalytic Converter Movement Notice
- Clean, Dry, Low Pressure Gas Source Notice
- Clearcoat/Ultraviolet Screeners Notice
- Component Fastener Tightening Notice
- Constant Velocity Joint Seal Damage Notice
- Emission Modification Notice
- Engine Emission Notice
- Engine Lifting Notice
- Engine Mounting Notice
- Evaporative Emission (EVAP) Pipes and Hoses Notice
- Excessive Force and Oxygen Sensor Notice
- Exhaust System Inspection Notice
- Exterior Trim Emblem Removal Notice
- Fastener Notice
- Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice
- Fuel Pressure Notice
- Fuel System Ground Notice
- Fuel Tank Strap Fastener Notice
- Handling ESD Sensitive Parts Notice
- Handling IAC Valve Notice
- Heated Oxygen and Oxygen Sensor Notice
- Ignition OFF When Disconnecting Battery Notice
- Installing Hoses without Twists or Bends Notice
- Instrument Panel Cluster (IPC) Servicing Notice
- Liftgate Assist Rod Notice
- Nylon Fuel Lines Notice
- OBDII Symbol Description Notice
- Oxygen Sensor Notice
- PCM and ESD Notice
- Pipe Wrench Positioning Notice
- Power Steering Hose Disconnected Notice
- Sealant Notice
- Service Programming System (SPS) Notice
- Silicon Contamination of Heated Oxygen Sensors Notice
- Single Cylinder Flooding Notice
- Steering Wheel in the Full Turn Position Notice
- Suspension Spring Handling Notice
- Test Probe Notice
- Transmission Overfill Notice
- Using Proper Power Steering Fluid Notice
- Valve Lifter Priming Notice
- Wheel Drive Shaft Damage Notice
- Wheel Drive Shaft Handling Notice
- Wheel Drive Shaft Service Notice
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.