SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1458 (MANUAL TRANSMISSION CLUTCH SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Clutch Actuator Cylinder Mounting Bolts 12 N.m 106 lb in
Clutch Pedal Bracket Mounting Nuts 27 N.m 20 lb ft
Clutch Pedal Nut 50 N.m 37 lb ft
Clutch Pressure Plate Bolts1 70 N.m 52 lb ft
Cruise Control Release Switch Bracket Retaining Bolts 12 N.m 106 lb in
Driver Foot Rest Bracket Retaining Bolt 8 N.m 71 lb in
Driver Foot Rest Bracket Retaining Nut 10 N.m 89 lb in
Engine Flywheel Inspection Cover Retaining Bolts 25 N.m 18 lb ft
Negative Battery Cable Bolt 15 N.m 11 lb ft
1 Clutch pressure plate bolts must be tightened in sequence and in even increments over three passes, then tightened to final specification on the fourth pass.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.