SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 145 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)DESCRIPTION & OPERATIONNOTES
2004 Oldsmobile Bravada AWD

Description & Operation: Notes

2004 Oldsmobile Bravada AWDSECTION Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Accidental air bag deployment is possible. Personal injury may result. To avoid accidental air bag deployment or injury, read and carefully follow all WARNINGS and AIR BAG SAFETY PRECAUTIONS .

Supplemental Inflatable Restraint (SIR) system is designed to supplement protection provided by driver-side and passenger-side seat belts. A frontal collision of sufficient force up to 30 degrees off center line of vehicle will deploy driver-side and passenger-side air bag modules. A side collision of sufficient force will deploy side impact air bag module on side of impact. Steering column and knee bolsters also absorb collision energy.

SIR system consists of Sensing and Diagnostic Module (SDM), driver-side and passenger-side air bag modules, front end discriminating sensor, driver and passenger side impact air bag modules, Side Impact Sensors (SIS), SIR coil assembly and AIR BAG warning light.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.