Engine Block Plug Installation

2004 Oldsmobile Bravada AWDSECTION Engine Block Plug Installation
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE .
  1. Install the threaded oil gallery plugs.

    Tighten 

    Tighten the oil gallery plugs to 30 N.m (22 lb ft)

    Fig 1: Oil Gallery Plugs
    G01703652Courtesy of GENERAL MOTORS CORP.
  2. Install the remaining oil gallery plugs using.

    GM P/N United States 12346004,

    GM P/N Canada 10953480 or the equivalent.

    Fig 2: Remaining Oil Gallery Plugs
    G01703653Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.