Wheel Alignment Specifications

2004 Oldsmobile Bravada AWDSECTION Wheel Alignment Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Alignment Specifications

Suspension Camber Camber Cross Tolerance Caster Caster Cross Tolerance Total Toe Steering Wheel Angle Thrust Angle
Vibe, Vibe GT, 2WD
Front -0.57° +/- 0.75° 0.75° 2.78° +/- 0.75° 0.75° 0° +/- 0.20° 0° +/- 3.5° -
Rear -1.45° +/- 0.50° 0.50° - - +0.26° +/- 0.26° - 0° +/- 0.13°
Vibe AWD
Front -0.48° +/- 0.75° 0.75° 2.77° +/- 0.75° 0.75° 0° +/- 0.20° 0° +/- 3.5° -
Rear -0.73° +/- 0.75° 0.75° - - +0.20° +/- 0.20° - 0° +/- 0.10°
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.