SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1394 (REAR DRIVE AXLE)SPECIFICATIONSSPACER AND SHIM SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Spacer and Shim Specifications

2004 Oldsmobile Bravada AWDSECTION Spacer and Shim Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Ring Gear Backlash Shim Selection

Identification Mark Available Shim Thickness
Metric English
25 1.59 - 1.61 mm 0.0626 - 0.0646 in
26 1.62 - 1.64 mm 0.0638 - 0.0657 in
27 1.65 - 1.67 mm 0.0650 - 0.0657 in
28 1.68 - 1.70 mm 0.0661- 0.0669 in
29 1.71- 1.73 mm 0.0673 - 0.0681 in
30 1.74 - 1.76 mm 0.0685 - 0.0693 in
31 1.77 - 1.79 mm 0.0697 - 0.0795 in
32 1.80 - 1.82 mm 0.0709 - 0.0717 in
33 1.83 - 1.85 mm 0.0720 - 0.0728 in
34 1.86 - 1.88 mm 0.0732 - 0.0740 in
35 1.89 - 1.91 mm 0.0744 - 0.0752 in
36 1.92 - 1.94 mm 0.0756 - 0.0764 in
37 1.95 - 1.97 mm 0.0768 - 0.0776 in
38 1.98 - 2.00 mm 0.0780 - 0.0787 in
39 2.01 - 2.03 mm 0.0791 - 0.0799 in
40 2.04 - 2.06 mm 0.0803 - 0.0811 in
41 2.07 - 2.09 mm 0.0815 - 0.0823 in
42 2.10 - 2.12 mm 0.0827 - 0.0835 in
43 2.13 - 2.15 mm 0.0839 - 0.0846 in
44 2.16 - 2.18 mm 0.0850 - 0.0858 in
45 2.19 - 2.21 mm 0.0862 - 0.0870 in
46 2.22 - 2.24 mm 0.0874 - 0.0882 in
47 2.25 - 2.27 mm 0.0886 - 0.0894 in
48 2.28 - 2.30 mm 0.0898 - 0.0906 in
49 2.31 - 2.33 mm 0.0909 - 0.0917 in
50 2.34 - 2.36 mm 0.0921 - 0.0929 in
51 2.37 - 2.39 mm 0.0933 - 0.0941 in
52 2.40 - 2.42 mm 0.0945 - 0.0953 in
53 2.43 - 2.45 mm 0.0957 - 0.0965 in
54 2.46 - 2.48 mm 0.0969 - 0.0976 in
55 2.49 - 2.51 mm 0.0980 - 0.0988 in
56 2.52 - 2.54 mm 0.0992 - 0.1000 in
57 2.55 - 2.57 mm 0.1004 - 0.1012 in
58 2.58 - 2.60 mm 0.1016 - 0.1024 in
59 2.61 - 2.63 mm 0.1028 - 0.1035 in
60 2.64 - 2.66 mm 0.1039 - 0.1047 in
Drive Pinion Preload Shim Selection

Identification Mark Available Shim Thickness
Metric English
41 1.695 - 1.705 mm 0.0667 - 0.0671 in
42 1.705 - 1.715 mm 0.0671 - 0.0675 in
43 1.715 - 1.725 mm 0.0675 - 0.0679 in
44 1.725 - 1.735 mm 0.0679- 0.0683 in
45 1.735 - 1.745 mm 0.0683 - 0.0687 in
46 1.745 - 1.755 mm 0.0687 - 0.0691 in
47 1.755 - 1.765 mm 0.0691 - 0.0695 in
48 1.765 - 1.775 mm 0.0695 - 0.0699 in
49 1.775 - 1.785 mm 0.0699 - 0.0703 in
50 1.785 - 1.795 mm 0.0703 - 0.0707 in
51 1.795 - 1.805 mm 0.0707 - 0.0711 in
52 1.805 - 1.815 mm 0.0711 - 0.0715 in
53 1.815 - 1.825 mm 0.0715 - 0.0719 in
54 1.825 - 1.835 mm 0.0719 - 0.0722 in
55 1.835 - 1.845 mm 0.0722 - 0.0726 in
56 1.845 - 1.855 mm 0.0726 - 0.0730 in
57 1.855 - 1.865 mm 0.0730 - 0.0734 in
58 1.865 - 1.875 mm 0.0734 - 0.0738 in
59 1.875 - 1.885 mm 0.0738 - 0.0742 in
60 1.885 - 1.895 mm 0.0742 - 0.0746 in
61 1.895 - 1.905 mm 0.0746 - 0.0750 in
62 1.905 - 1.915 mm 0.0750 - 0.0754 in
63 1.915 - 1.925 mm 0.0754 - 0.0758 in
64 1.925 - 1.935 mm 0.0758 - 0.0762 in
65 1.935 - 1.945 mm 0.0762 - 0.0766 in
70 1.945 - 1.955 mm 0.0766 - 0.0770 in
71 1.955 - 1.965 mm 0.0770 - 0.0774 in
72 1.965 - 1.975 mm 0.0774 - 0.0778 in
73 1.975 - 1.985 mm 0.0778 - 0.0781 in
74 1.985 - 1.995 mm 0.0781 - 0.0785 in
75 1.995 - 2.005 mm 0.0785 - 0.0789 in
76 2.005 - 2.015 mm 0.0789 - 0.0793 in
77 2.015 - 2.025 mm 0.0793 - 0.0797 in
78 2.025 - 2.035 mm 0.0797 - 0.0801 in
79 2.035 - 2.045 mm 0.0801 - 0.0805 in
80 2.045 - 2.055 mm 0.0805 - 0.0809 in
81 2.055 - 2.065 mm 0.0809 - 0.0813 in
82 2.065 - 2.075 mm 0.0813 - 0.0817 in
83 2.075 - 2.085 mm 0.0817 - 0.0821 in
84 2.085 - 2.095 mm 0.0821 - 0.0825 in
85 2.095 - 2.105 mm 0.0825 - 0.0829 in
86 2.105 - 2.115 mm 0.0829 - 0.0833 in
87 2.115 - 2.125 mm 0.0833 - 0.0837 in
88 2.125 - 2.135 mm 0.0837 - 0.0841 in
89 2.135 - 2.145 mm 0.0841 - 0.0844 in
90 2.145 - 2.155 mm 0.0844 - 0.0848 in
91 2.155 - 2.165 mm 0.0848 - 0.0852 in
92 2.165 - 2.175 mm 0.0852 - 0.0856 in
93 2.175 - 2.0185 mm 0.0856 - 0.0860 in
94 2.185 - 2.195 mm 0.0860 - 0.0864 in
95 2.195 - 2.205 mm 0.0864 - 0.0868 in
Side Gear Thrust Washer Selection

Metric English
1.48 - 1.52 mm 0.0583 - 0.0598 in
1.53 - 1.57 mm 0.0602 - 0.0618 in
1.58 - 1.62 mm 0.0622 - 0.0638 in
1.63 - 1.67 mm 0.0642 - 0.0657 in
1.68 - 1.72 mm 0.0661 - 0.0677 in
1.73 - 1.77 mm 0.0681 - 0.0697 in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.