Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1394 (REAR DRIVE AXLE)SPECIFICATIONSDIFFERENTIAL CARRIER ASSEMBLY SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Differential Carrier Assembly Specifications
2004 Oldsmobile Bravada AWDSECTION Differential Carrier Assembly Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Differential Carrier Assembly Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Differential Backlash | 0.10 - 0.15 mm | 0.0039 - 0.0059 in |
| Differential Side Gear Backlash | 0.05 - 0.20 mm | 0.0020 - 0.0079 in |
| Differential Side Gear Preload (Maximum) | 0.4 - 0.7 N.m | 3.0 - 6.0 lb in |
| Pinion Bearing Preload Starting Torque | 0.7 - 1.27 N.m | 6 - 11 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.