Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1389 (REAR SUSPENSION SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pipe Fitting | 15 N.m | 11.1 lb ft |
| Crossmember-to-Body Nuts and Bolts | 105 N.m | 77.4 lb ft |
| Lower Control Arm-to-Body Front Bolts, 4WD | 65 N.m | 47.9 lb ft |
| Lower Control Arm-to-Crossmember Nut and Bolt, 4WD | 74 N.m | 54.6 lb ft |
| Lower Control Arm-to-Knuckle Front Nut and Bolt, 4WD | 74 N.m | 54.6 lb in |
| Lower Control Arm-to-Knuckle Rear Nut and Cam Bolt, 4WD | 74 N.m | 54.6 lb ft |
| Park Brake Cable Bracket Bolts | 5.4 N.m | 47.79 lb in |
| Rear Axle-to-Body Nuts and Bolts, 2WD | 85 N.m | 62.7 lb ft |
| Rear Wheel Drive Shaft Spindle Nut | 216 N.m | 159.3 lb ft |
| Shock Absorber Piston Rod Nut | 56 N.m | 41.3 lb ft |
| Shock Absorber-to-Lower Control Arm Nut and Bolt, 4WD | 140 N.m | 103.3 lb ft |
| Shock Absorber-to-Rear Axle Nut, 2WD | 80 N.m | 59.0 lb ft |
| Spring Mount Nuts and Bolts | 80 N.m | 59.0 lb ft |
| Stabilizer Shaft Insulator Bracket Bolts, 4WD | 18 N.m | 13.3 lb ft |
| Stabilizer Shaft Link Nuts | 44 N.m | 32.5 lb ft |
| Stabilizer Shaft-to-Rear Axle Nuts and Bolts, 2WD | 195 N.m | 143.8 lb ft |
| Upper Control Arm-to-Crossmember Nut and Cam Bolt, 4WD | 74 N.m | 54.6 lb ft |
| Upper Control Arm-to-Knuckle Nut and Bolt, 4WD | 74 N.m | 54.6 lb ft |
| Wheel Bearing and Hub Assembly Bolts, 2WD | 61 N.m | 45.0 lb ft |
| Wheel Bearing and Hub Assembly Bolts, 4WD | 56 N.m | 41.3 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.