Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2004 Oldsmobile Bravada AWDSECTION Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the strut assembly. Refer to Strut Assembly Replacement .
- Use the J 45400 , or equivalent, in order to compress the spring (8). See Special Tools and Equipment .
- Remove the strut mount cover (2).
- Remove the strut mount nut (3).
- Remove the strut mount (4).
- Remove the seal (5).
- Remove the spring seat (6).
- Remove the strut shield (7).
- Remove the spring (8).
- Remove the strut bumper (1).
- Remove the spring lower insulator (10).
- Remove the absorber portion of the strut (9).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.