Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1380 (SEAT BELT SYSTEM)COMPONENT LOCATORSEAT BELT COMPONENT VIEWS
2004 Oldsmobile Bravada AWD
Seat Belt Component Views
2004 Oldsmobile Bravada AWDSECTION Seat Belt Component Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Inflatable Restraint Front End Discriminating Sensor - Left |
| 2 | Instrument Cluster Assembly |
| 3 | Inflatable Restraint Steering Wheel Module |
| 4 | Inflatable Restraint IP Module |
| 5 | Inflatable Restraint Front End Discriminating Sensor - Right |
| 6 | Inflatable Restraint Side Impact Module - Right |
| 7 | Inflatable Restraint Side Impact Sensor - Right |
| 8 | Seat Belt Pretensioner - RF |
| 9 | Inflatable Restraint Sensing and Diagnostic Module (SDM) |
| 10 | Seat Belt Buckle Switch |
| 11 | Seat Position Sensor |
| 12 | Inflatable Restraint Side Impact Sensor - Left |
| 13 | Seat Belt Pretensioner - LF |
| 14 | Inflatable Restraint Side Impact Module - Left |
| 15 | Inflatable Restraint Steering Wheel Module Coil |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.