Line Pressure

2004 Oldsmobile Bravada AWDSECTION Line Pressure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Line Pressure

Application Specification
Metric English
Line Pressure at Idle 600-700 RPM
  • Reverse (R) Range
553-623 kPa 80-100 psi
  • Drive (D) Range
372-412 kPa 54-60 psi
Line Pressure at Stall Speed 2400-2700 RPM
  • Reverse (R) Range
1764-1964 kPa 256-284 psi
  • Drive (D) Range
1126-1226 kPa 164-178 psi
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.