Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Front Seat Belt Lower Anchor Bolt 42 N.m 31 lb ft
Fuel Filler Door Release Cable Handle Bolt 10 N.m 89 lb in
Lift Gate Applique 4 N.m 35 lb in
Lift Gate Handle Nuts 4 N.m 35 lb in
Lift Gate Hinge Bolts 19.5 N.m 14 lb ft
Lift Gate Latch 7 N.m 62 lb in
Lift Gate Lock Striker Bolts 11.5 N.m 8.5 lb ft
Rear Window Strut Bolts 6 N.m 53 lb in
Lift Gate Strut Bolts 22 N.m 16 lb ft
Lift Gate Strut Ball Stud 7.0 N.m 62 lb int
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.