SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1336 (ENGINE MECHANICAL - 3.1L UNIT REPAIR)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: See TSB For Revised Lower Intake Torque
FASTENER TIGHTENING SPECIFICATIONS

Application Specification
Metric English
Accelerator Control Cable Bracket Bolt/Nut 13 N.m 115 lb in
Air Injection Check Valve - with NC1 California Emissions 20 N.m 15 lb ft
Air Injection Check Valve Front Bracket Bolt and Nut - with NC1 California Emissions 25 N.m 18 lb ft
Air Injection Check Valve Nut - with NC1 California Emissions 10 N.m 89 lb in
Air Injection Check Valve Pipe Adapter - with NC1 California Emissions 30 N.m 22 lb ft
Air Injection Check Valve Rear Bracket Nuts - with NC1 California Emissions 25 N.m 18 lb ft
Air Injection Solenoid Bolt - with NC1 California Emissions 10 N.m 89 lb in
Camshaft Position Sensor Bolt 10 N.m 89 lb in
Camshaft Sprocket Bolt 140 N.m 103 lb ft
Camshaft Thrust Plate Screw 10 N.m 89 lb in
Connecting Rod Bearing Cap Nut
First Pass 20 N.m 15 lb ft
Final Pass 75 degrees
Coolant Drain Plug 19 N.m 14 lb ft
Coolant Temperature Sensor 23 N.m 17 lb ft
Crankshaft Balancer Bolt
First Pass 70 N.m 52 lb ft
Final Pass 85 degrees
Crankshaft Main Bearing Cap Bolt/Stud
First Pass 50 N.m 37 lb ft
Final Pass 77 degrees
Crankshaft Oil Deflector Nut 25 N.m 18 lb ft
Crankshaft Position Sensor Bolt - Front Cover 10 N.m 89 lb in
Crankshaft Position Sensor Stud - Side of Engine Block 11 N.m 98 lb in
Crankshaft Position Sensor Wiring Bracket Bolt 40 N.m 30 lb ft
Cylinder Head Bolt (NEW Bolts)
First Pass 60 N.m 44 lb ft
Final Pass 95 degrees
Drive Belt Shield Bolt 10 N.m 89 lb in
Drive Belt Tensioner Bolt 50 N.m 37 lb ft
EGR Valve Adapter Pipe to Exhaust Manifold Nut 25 N.m 18 lb ft
EGR Valve Pipe to EGR Valve Bolt 25 N.m 18 lb ft
EGR Valve to Upper Intake Manifold Bolt 30 N.m 22 lb ft
Engine Front Cover Bolt - Large 55 N.m 41 lb ft
Engine Front Cover Bolt - Medium 55 N.m 41 lb ft
Engine Front Cover Bolt - Small 27 N.m 20 lb ft
Engine Mount Bracket Bolt 58 N.m 43 lb ft
Engine Mount Lower Nut 43 N.m 32 lb ft
Engine Mount Strut and Lift Bracket Bolt - Engine Left Rear 70 N.m 52 lb ft
Engine Mount Strut Bolt/Nut 48 N.m 35 lb ft
Engine Mount Strut Bracket Bolt - Upper Radiator Support 28 N.m 21 lb ft
Engine Mount Strut and Generator Bracket Bolt 50 N.m 37 lb ft
Engine Mount Upper Nut 47 N.m 35 lb ft
Engine Oil Pressure Indicator Switch 16 N.m 12 lb ft
Engine Wiring Harness Bracket Bolt 13 N.m 115 lb in
Exhaust Manifold Nut 16 N.m 12 lb ft
Exhaust Manifold Stud 18 N.m 13 lb ft
Flywheel Bolt 71 N.m 52 lb ft
Fuel Feed and Return Pipe Clip Nut 25 N.m 18 lb ft
Fuel Feed and Return Pipe Clip Stud 50 N.m 37 lb ft
Fuel Feed Pipe to Fuel Injector Rail Nut 17 N.m 13 lb ft
Fuel Injector Rail Bolt 10 N.m 89 lb in
Fuel Pipe Bracket Bolt/Stud 50 N.m 37 lb ft
Fuel Pipe Clip Bolt 8 N.m 71 lb in
Fuel Return Pipe to Fuel Injector Rail Nut 17 N.m 13 lb ft
Heated Oxygen Sensor 42 N.m 31 lb ft
Heater Inlet Pipe Nut 25 N.m 18 lb ft
Heater Inlet Pipe Stud 50 N.m 37 lb ft
Ignition Coil Bracket Bolt/Nut/Stud 25 N.m 18 lb ft
Intake Manifold Coolant Pipe Bolt 10 N.m 89 lb in
Knock Sensor 19 N.m 14 lb ft
Lower Intake Manifold Bolt
First Pass (Vertical Bolts) 7 N.m 62 lb in
First Pass (Diagonal Bolts) 7 N.m 62 lb in
Final Pass (Vertical Bolts) 13 N.m 115 lb in
Final Pass (Diagonal Bolts) 25 N.m 18 lb ft
MAP Sensor Bolt 5 N.m 44 lb in
Oil Cooler Connector 50 N.m 37 lb ft
Oil Cooler Hose Fitting 19 N.m 14 lb ft
Oil Cooler Pipe Bracket Bolt 25 N.m 18 lb ft
Oil Filter 13 N.m 115 lb in
Oil Filter Bypass Hole Plug 19 N.m 14 lb ft
Oil Filter Fitting 39 N.m 29 lb ft
Oil Gallery Plug - 1/4 inch 19 N.m 14 lb ft
Oil Gallery Plug - 3/8 inch 33 N.m 24 lb ft
Oil Level Indicator Tube Bolt 25 N.m 18 lb ft
Oil Level Sensor Bolt 10 N.m 89 lb in
Oil Pan Bolt 25 N.m 18 lb ft
Oil Pan Drain Plug 25 N.m 18 lb ft
Oil Pan Side Bolt 50 N.m 37 lb ft
Oil Pump Cover Bolt 10 N.m 89 lb in
Oil Pump Drive Clamp Bolt 36 N.m 27 lb ft
Oil Pump Mounting Bolt 41 N.m 30 lb ft
Spark Plug - New Cylinder Head 27 N.m 20 lb ft
Spark Plug - After Initial Installation 15 N.m 13 lb ft
Thermostat Bypass Pipe to Engine Front Cover Bolt 12 N.m 106 lb in
Thermostat Bypass Pipe to Throttle Body Nut 25 N.m 18 lb ft
Throttle Body Bolt/Stud 25 N.m 18 lb ft
Timing Chain Dampener Bolt 21 N.m 15 lb ft
Upper Intake Manifold Bolt/Stud 25 N.m 18 lb ft
Valve Lifter Guide Bolt 10 N.m 89 lb in
Valve Rocker Arm Bolt
First Pass 19 N.m 14 lb ft
Final Pass 30 degrees
Valve Rocker Arm Cover Bolt 10 N.m 89 lb in
Water Outlet Bolt 25 N.m 18 lb ft
Water Pump Bolt 10 N.m 89 lb in
Water Pump Pulley Bolt 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.