SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (STEERING WHEEL AND STEERING COLUMN)REMOVAL & INSTALLATIONSIR CLOCKSPRING ASSEMBLYNOTES
2004 Oldsmobile Bravada AWD

Sir CLOCKSPRING Assembly: Notes

2004 Oldsmobile Bravada AWDSECTION Notes
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2001 Pontiac Firebird, 2001 Pontiac Bonneville, 2001 Chevrolet Monte Carlo, 2001 Chevrolet Impala, and 2001 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Set front wheels in straight-ahead position before removing or installing clockspring assembly. This centers the clockspring assembly. If an off-centered clockspring assembly is installed, ribbon in clockspring assembly will break when steering wheel is turned. Always keep ignition switch in LOCK position to prevent wheel from turning and allowing SIR clockspring to become off-centered. To center the clockspring assembly, see SIR CLOCKSPRING ASSEMBLY  under ADJUSTMENTS.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.