SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (STEERING WHEEL AND STEERING COLUMN)REMOVAL & INSTALLATIONSIR CLOCKSPRING ASSEMBLYINSTALLATION
2004 Oldsmobile Bravada AWD

Sir CLOCKSPRING Assembly: Installation

2004 Oldsmobile Bravada AWDSECTION Installation
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2001 Pontiac Firebird, 2001 Pontiac Bonneville, 2001 Chevrolet Monte Carlo, 2001 Chevrolet Impala, and 2001 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Use care not to pinch wires when installing components. After wiring is fed through column, attach CAUTION tag to wiring near connector at base of steering column. Tag is included in SIR clockspring assembly repair kit.

To install, reverse removal procedure. Ensure clockspring assembly hub and steering shaft are centered before installing clockspring assembly. After clockspring assembly is installed, remove slack from clockspring assembly wiring in steering column to prevent wire damage. Activate SIR system. See DISABLING & ACTIVATING AIR BAG SYSTEM .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.