Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 129 (ENGINE CONTROLS - REMOVAL & INSTALLATION)FUEL SYSTEMSFUEL PRESSURE REGULATORREMOVAL
2004 Oldsmobile Bravada AWD
Fuel Pressure Regulator: Removal
2004 Oldsmobile Bravada AWDSECTION Removal
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Remove air cleaner resonator from top of engine. Fuel pressure regulator is mounted on fuel rail near front of engine. See Fig 1. Disconnect engine wiring harness from retaining clips at front of engine.
- Clean area surrounding fuel pressure regulator with a spray type engine cleaner, such as GM X-30A. DO NOT use any solvent that contains Methyl Ethyl Ketone (MEK). Solvents containing MEK may damage fuel system components. Disconnect fuel pressure regulator vacuum line.
- Place shop towel below fuel pressure regulator to catch any spilled fuel. Disconnect fuel return line at fuel pressure regulator. See FUEL LINE DISCONNECT FITTINGS .
- Remove screws from fuel pressure regulator retainer and fuel return line retainer. Remove fuel pressure regulator retainer and fuel return line retainer. Remove fuel pressure regulator.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.