SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1283 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Doors Fastener Tightening Specifications

Application Specification
Metric English
Arm Rest Bracket Screws Rear Door 3 N.m 27 lb in
Body Side Hinge Bolts 33 N.m 24 lb ft
Cone Adjuster Body Side Hinge Bolts 10 N.m 89 lb in
Door Frame Molding Screws 2 N.m 18 lb in
Door Lock Screws 10 N.m 89 lb in
Door Lock Striker Screws 25 N.m 18 lb ft
Door Side Hinge Bolts 33 N.m 24 lb ft
Door Stationary Window Bolt 10 N.m 89 lb in
Door Stationary Window Molding Screws 2 N.m 18 lb in
Door Stationary Window Screws 2 N.m 18 lb in
Door Window Weatherstrip Bolts 10 N.m 89 lb in
Door Window Weatherstrip Retainer Screws 2 N.m 18 lb in
Electric Mirror Motor Screws 10 N.m 89 lb in
Front Door Lock Actuator Screws 2 N.m 18 lb in
Front Window Channel Screw 2 N.m 18 lb in
Inner Handle Bezel Screw (Pontiac) 2 N.m 18 lb in
Inner Trim Panel Screws 3 N.m 27 lb in
Intermediate Door Hinge Bolts 33 N.m 24 lb ft
Outer Belt Sealing Strip Machine Screw 2 N.m 18 lb in
Outer Belt Sealing Strip Self-Tapping Screw 2 N.m 18 lb in
Outer Energy Absorber Pad Screws 2 N.m 18 lb in
Outside Door Handle Bolts 10 N.m 89 lb in
Outside Mirror Nuts 10 N.m 89 lb in
Radio Speaker Screws 2 N.m 18 lb in
Rear Door Lock Actuator Screws 2 N.m 18 lb in
TORX Head Body Side Hinge Bolt 10 N.m 89 lb in
Upper Seat Belt Guide Loop Attachment Nut 43 N.m 31 lb ft
Window to Regulator Bolts 10 N.m 89 lb in
Window Regulator Bolts 10 N.m 89 lb in
Window Regulator Motor Bolts 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.