Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 128 (ENGINE CONTROLS - THEORY & OPERATION)MODEL IDENTIFICATION
2004 Oldsmobile Bravada AWD
Model Identification
2004 Oldsmobile Bravada AWDSECTION Model Identification
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2002 Saturn Vue, 2002 Pontiac Montana, 2002 Pontiac Aztek, 2002 Oldsmobile Silhouette, and 2002 Oldsmobile Bravada. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle model is identified by fifth character of Vehicle Identification Number (VIN). VIN is stamped on metal pad on top of left end of instrument panel, near windshield. See MODEL IDENTIFICATION table.
MODEL IDENTIFICATION
| Series (1) | Model | ||||
|---|---|---|---|---|---|
| "A" | 2WD Aztek & Rendezvous | ||||
| "B" | AWD Aztek & Rendezvous | ||||
| "C" | 2WD Avalanche, Cab & Chassis, Escalade, Sierra, Silverado, Suburban, Tahoe & Yukon XL | ||||
| "E" | 2WD Tracker | ||||
| "G" | Cutaway, Express, RV Cutaway & Savana | ||||
| "J" | 4WD Tracker | ||||
| "K" | 4WD Avalanche, Cab & Chassis, Escalade, Escalade EXT, Sierra, Silverado, Suburban, Tahoe, Yukon & Yukon XL | ||||
| "L" | AWD Astro & Safari | ||||
| "M" | 2WD Astro & Safari | ||||
| "S" | 2WD Blazer, Bravada, Envoy, Jimmy Canadian, Sonoma, S10 Pickup & TrailBlazer | ||||
| "T" | AWD/4WD Blazer, Bravada, Envoy XL, Jimmy Canadian, Sonoma, S10 Pickup & TrailBlazer | ||||
| "U" | Montana, Silhouette & Venture | ||||
| "X" | Montana & Venture (Extended or long wheel base) | ||||
| "Z" | (2) VUE | ||||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.