Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 122 (REAR SUSPENSION SYSTEM)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 Oldsmobile Bravada, 2002 GMC Sonoma, 2002 GMC Jimmy, 2002 GMC Envoy XL, and 2002 GMC Envoy. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Leaf Spring to Front Bracket Nut | 89 (122) |
| Leaf Spring U-Bolt Nuts | 74 (100) |
| Rear Tie Rod Axle Bracket Nuts | 39 (53) |
| Rear Tie Rod to Frame Bracket Nut | 45 (61) |
| Rear Tie Rod Bolt to Axle Bracket Nut | 45 (61) |
| Shock Absorber Lower Nut (4 Door Utility) | 74 (100) |
| Shock Absorber Lower Nut (Pickups and 2 Door Utility) | 62 (84) |
| Shock Absorber Upper Bolts | 18 (25) |
| Spring Shackle to Frame Nut | 89 (122) |
| Spring Shackle to Leaf Spring Nut | 89 (122) |
| Stabilizer Bar Lower Link Nut (4 Door Utility) | 42 (57) |
| Stabilizer Bar Lower Link Nut (Pickups and 2 Door Utility) | 50 (68) |
| Stabilizer Bar Upper Link Nut (4 Door Utility) | 50 (68) |
| Stabilizer Bar Upper Link Nut (Pickup and 2 Door Utility) | 25(35) |
| Stabilizer Clamp U-Bolt Nuts | 44 (60) |
| Wheel Nut | 100 (136) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.