Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Label - Service Parts ID
| Callout | Component Name |
|---|---|
| 1 | Vehicle Identification Number |
| 2 | Engineering Model Number (Vehicle Division, Vehicle Line and Body Style) |
| 3 | Interior Trim and Decor Level |
| 4 | Exterior (Paint Color) WA Number |
| 5 | Paint Technology |
| 6 | Special Order Paint Colors and Numbers |
| 7 | Vehicle Option Content |
The service parts identification label has been developed and placed on the vehicle to help service and parts personnel identify parts and options that were originally installed on the vehicle.
The service parts identification label (1) is located on the inside of the rear bumper fascia access hole cover. Refer to RPO Code List in General Information for a definition of the codes that are printed on the service parts identification label or referred to in this service information.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.