Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1129 (THEFT DETERRENT SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2004 Oldsmobile Bravada AWD
Scan Tool Data List
2004 Oldsmobile Bravada AWDSECTION Scan Tool Data List
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM) Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, engine OFF | |||
| Auxiliary Sensor | Security Data | Disarmed/Armed | Disarmed |
| Content Theft Deterrent | Security Data | On/Off | Off |
| CTD Alarm State | Security Data | Close Dr. Wait/Open Dr. Wait/Lever Active/Trigger Idle/Armed/Full Alarm | Open Dr. Wait |
| CTD Enable | Security Data | On/Off | Off |
| Driver Door Open Sw. | Inputs | Open/Closed | Closed |
| DRVR. Door Sensor | Security Data | Disarmed/Armed/Active/Inactive | Disarmed |
| Intrusion Sensor | Security Data | DRVR. ID On | DRVR. ID On |
| Key Cylinder Unlock | Inputs | Active/Inactive | Inactive |
| Key in Ignition | Inputs | Active/Inactive | Inactive |
| LH Lift Gate Ajar Switch | Inputs | Active/Inactive | Inactive |
| Liftgate Key Cyl. Unlk. | Inputs | Active/Inactive | Inactive |
| Liftgate Open Switch | Inputs | Active/Inactive | Inactive |
| Liftgate Sensor | Security Data | Disarmed/Armed/Active/Inactive/Disabled | Disarmed |
| Park Lamp Monitor | Inputs | Active/Inactive | Inactive |
| Passenger Door Open Sw. | Inputs | Open/Closed | Closed |
| Passenger Door Sensor | Security Data | Disarmed/Armed/Active/Inactive | Disarmed |
| Power Mode Sensor | Security Data | Disarmed/Armed/Active/Inactive | Disarmed |
| Rear Door Open Switch | Inputs | Active/Inactive | Inactive |
| Rear Door Sensor | Security Data | Disarmed/Armed/Active/Inactive | Disarmed |
| RT. and Left Glass Sen. | Security Data | Disarmed/Armed/Active/Inactive | Disarmed |
| Security LED | Security Data | On/Off | Off |
| Service Alarm Sensor | Security Data | Disarmed/Armed/Active/Inactive | Disarmed |
| Shock Sensor | Security Data | On/Off | Off |
| RH Lift Gate Ajar Switch | Inputs | Inputs | Inactive |
| Security LED | Security Data | On/Off | Off |
Powertrain Control Module (PCM) Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, engine OFF | |||
| PCM/VCM in VTD Fail Enable | Engine Data 1 | Yes/No | No |
| VTD Auto. Learn Timer | Engine Data 1 | Active/Inactive | Inactive |
| VTD Fuel Disable | Engine Data 1 | Active/Inactive | Inactive |
| VTD Fuel Disable Until Ign. Off | Engine Data 1 | Yes/No | No |
Vehicle Theft Deterrent Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition On, engine OFF | |||
| 8 Digit GM Part Number | Module Information | Numeric | Varies |
| Auto Learn Timer | Data | Minutes | 10:00 Min. |
| Calibration ID | Module Information | Numeric | Varies |
| Ignition Counter | Data | 0-50 | Varies |
| Julian Date of Build | Module Information | Numeric | Varies |
| Manufacturers Enable Counter | Data | 0-255 | 0 |
| No. of Learned Key Codes | Data | 1-10 | 2 |
| PROM ID | Module Information | Numeric | Varies |
| Security Lamp Status | Inputs | On/Off/Flash | Off |
| Seed and Key Timer | Data | Minutes | 0-10 |
| VTD States | Input | Ignition Off/Monitor Key/Learn More Keys/No Coded Key/Auto Learn Pending | Monitor Key |
| Year Module Built | Module Information | Numeric | Varies |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.