SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1122 (BODY REAR END)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Endgate Bellcrank Bolt 10 N.m 89 lb in
Endgate Bolt 33 N.m 28 lb ft
Endgate Handle Bolt 10 N.m 89 lb in
Endgate Latch Bolt 10 N.m 89 lb in
Endgate Nut 33 N.m 28 lb ft
Endgate Strikers 25 N.m 18 lb ft
Endgate Support Cable Bolt 3 N.m 27 lb in
Endgate Torque Rod Bolt 10 N.m 89 lb in
Fuel Filler Pocket Screw 2 N.m 18 lb in
Liftgate Hinge Bolt 33 N.m 28 lb ft
Liftgate Hinge Nut 33 N.m 28 lb ft
Liftgate Latch Bolt 10 N.m 89 lb in
Liftgate Spoiler Nuts 6 N.m 53 lb in
Liftgate Striker Bolt 10 N.m 89 lb in
Torque Rod Bracket Bolt 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.