Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Controls Component Views
2004 Oldsmobile Bravada AWDSECTION Engine Controls Component Views
WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | EVAP Purge Solenoid |
| 2 | BARO Sensor |
| 3 | Throttle Body Assembly |
| 4 | Upper Intake Manifold |
| 5 | Intake Manifold Runner Control (IMRC) Valve |
| Callout | Component Name |
|---|---|
| 1 | Cylinder 5 Ignition Coil |
| 2 | Cylinder 3 Ignition Coil |
| 3 | Cylinder 1 Ignition Coil |
| 4 | Knock Sensor (KS) - Bank 1 |
| 5 | Crankshaft Position Sensor (CKP) Sensor |
| 6 | Engine Block Heater Assembly |
| Callout | Component Name |
|---|---|
| 1 | Cylinder 2 Ignition Coil |
| 2 | Cylinder 4 Ignition Coil |
| 3 | Cylinder 6 Ignition Coil |
| 4 | Engine Coolant Temperature (ECT) Sensor |
| 5 | Knock Sensor - Bank 2 |
| 6 | Engine Oil level/Temperature Sensor |
| 7 | Engine Oil Pressure (EOP) Sensor |
| Callout | Component Name |
|---|---|
| 1 | Camshaft Position (CMP) Sensor - Bank 1 Exhaust |
| 2 | Camshaft Actuator Solenoid - Bank 1 Exhaust |
| 3 | Camshaft Actuator Solenoid - Bank 1 Intake |
| 4 | Camshaft Position (CMP) Sensor - Bank 1 Intake |
| 5 | Camshaft Position (CMP) Sensor - Bank 2 Intake |
| 6 | Camshaft Actuator Solenoid - Bank 2 Intake |
| 7 | Camshaft Actuator Solenoid - Bank 2 Exhaust |
| 8 | Camshaft Position (CMP) Sensor - Bank 2 Exhaust |
| Callout | Component Name |
|---|---|
| 1 | Electronic Control Module (ECM) C1 |
| 2 | Electronic Control Module (ECM) |
| 3 | Electronic Control Module (ECM) C2 |
| Callout | Component Name |
|---|---|
| 1 | Accelerator Pedal Position (APP) Sensor |
| 2 | Accelerator Pedal |
| Callout | Component Name |
|---|---|
| 1 | Fuel Pump and Sender Assembly |
| 2 | Fuel Pump |
| 3 | Canister Vent Solenoid |
| 4 | EVAP Canister |
| 5 | Fuel Level Sender |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.