Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1016 (TRANSFER CASE - NVG 246-NP8)COMPONENT LOCATORTRANSFER CASE CONTROL CONNECTOR END VIEWS
2004 Oldsmobile Bravada AWD
Transfer Case Control Connector End Views
2004 Oldsmobile Bravada AWDSECTION Transfer Case Control Connector End Views
WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Front Axle Actuator Connector End View
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK/WHT | 1695 | Axle Switch Signal |
| B | LT BLU | 1296 | Axle Actuator - Control |
| C | BRN | 241 | Ignition 3 Voltage |
| D | - | - | Not Used |
| E | BLK | 2150 | Ground |
Propshaft Speed Sensor Connector End View - Front
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | YEL | 400 | Signal High - Front |
| 2 | PPL | 401 | Signal Low - Front |
Propshaft Speed Sensor Connector End View - Rear
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | LT BLU | 2221 | Signal High - Rear |
| 2 | DK GRN | 2222 | Signal Low - Rear |
Transfer Case Shift Control Module Connector End View - C1
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A1 | DK GRN/WHT | 1133 | ATC Class 2 Serial Data |
| A2 | LT BLU | 1296 | AXLE Actuator - Control |
| A3 | PNK | 1561 | AWD Indicator Control |
| A4 | PPL/WHT | 1565 | 4 LO Indicator Control |
| A5 | TAN/BLK | 1566 | 4 HI Indicator Control |
| A6 | LT BLU | 1693 | Switch Signal |
| A7 | BLK/WHT | 1554 | Encoder Low Reference |
| A8 | BLK/WHT | 1851 | Ground |
| B1 | - | - | Not Used |
| B2 | TAN | 1569 | Lock Solenoid Control |
| B3 | LT GRN/BLK | 1563 | 2 HI Indicator Control |
| B4 | BRN | 1560 | Neutral Indicator Control |
| B5 | GRY/BLK | 1694 | 4WD Low Signal |
| B6 | BRN/WHT | 1555 | Encoder Signal |
| B7-B8 | - | - | Not Used |
Transfer Case Shift Control Module Connector End View - C2
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A1 | PPL | 401 | Signal Low - Front |
| A2 | YEL | 400 | Signal High - Front |
| A3-A7 | - | - | Not Used |
| A8 | LT GRN/BLK | 431 | 5 Volt Reference |
| B1 | LT BLU | 2221 | Signal High - Rear |
| B2 | DK GRN | 2222 | Signal Low - Rear |
| B3-B5 | - | - | Not Used |
| B6 | BLK/WHT | 1695 | Axle Switch Signal |
| B7 | - | - | Not Used |
| B8 | GRY | 596 | 5 Volt Reference |
Transfer Case Shift Control Module Connector End View - C3
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 2150 | Ground |
| B | ORN | 1640 | Battery Positive Voltage |
| C | BLK | 1552 | Motor Control A |
| D | RED | 1553 | Motor Control B |
Transfer Case Shift Control Switch Connector End View - C1
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 1050 | Ground |
| B | PNK | 1561 | AWD Indicator Control |
| C | BRN | 1560 | Neutral Indicator Control |
| D | - | - | Not Used |
| E | PPL/WHT | 1382 | LED Dimming Supply |
| F | BRN/WHT | 230 | Instrument Panel Lamps Dimming Control |
| G | BRN | 241 | Ignition 3 Voltage |
| H | GRY | 596 | 5 Volt Reference |
Transfer Case Shift Control Switch Connector End View - C2
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | LT BLU | 1693 | Switch Signal |
| B | LT GRN/BLK | 1563 | 2 HI Indicator Control |
| C | PPL/WHT | 1565 | 4 LO Indicator Control |
| D | TAN/BLK | 1566 | 4 HI Indicator Control |
Transfer Case Connector End View - Encoder Motor
| Connector Part Information Terminal Identification |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | LT GRN/BLK | 431 | 5 Volt Reference |
| B | BRN/WHT | 1555 | Encoder Signal |
| C | BLK/WHT | 1554 | Encoder Low Reference |
| D | BLK | 1552 | Motor Control A |
| E | RED | 1553 | Motor Control B |
| F | ORN | 1640 | Battery Positive Voltage |
| G | TAN | 1569 | Lock Solenoid Control |
| H | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.