Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1011 (POWER STEERING SYSTEM)COMPONENT LOCATORPOWER STEERING SYSTEM CONNECTORS
2004 Oldsmobile Bravada AWD
Power Steering System Connectors
2004 Oldsmobile Bravada AWDSECTION Power Steering System Connectors
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Brake Pedal Position Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | RED | 5688 | Brake Pedal Position Sensor 5V Supply |
| B | DK BLU | 5066 | Brake Pedal Position Sensor Signal |
| C | WHT | 5689 | Brake Pedal Position Sensor 5V Return |
Electro Hydraulic Power Steering (EHPS) C1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | RED | 5875 | EHPS 42V Battery |
| B | BLK | 5691 | EHPS 42V Ground |
Electro Hydraulic Power Steering (EHPS) C2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| 1 | - | - | Not Used |
| 2 | BLK/WHT | 1851 | Ground |
| 3-4 | - | - | Not Used |
| 5 | ORN | 5688 | Brake Pedal Position Sensor 5V Supply |
| 6 | YEL | 5066 | Brake Pedal Position Sensor Signal |
| 7 | GRY/BLK | 5689 | Brake Pedal Position Sensor 5V Return |
| 8 | TAN | 2501 | High Speed GMLAN Serial Data Bus- |
| 9 | TAN/WHT | 2500 | High Speed GMLAN Serial Data Bus+ |
| 10 | BLK/WHT | 451 | Ground |
| 11 | PNK | 43 | Accessory Voltage |
| 12 | - | - | Not Used |
| 13 | LT GRN | 1763 | Steering Wheel Position Signal A |
| 14 | - | - | Not Used |
| 15 | LT BLU | 1764 | Steering Wheel Position Signal B |
| 16-17 | - | - | Not Used |
| 18 | YEL/BLK | 5696 | EHPS Interlock Signal |
| 19 | YEL/BLK | 5696 | EHPS Interlock Signal |
| 20 | TAN | 2501 | High Speed GMLAN Serial Data Bus- |
| 21 | TAN/WHT | 2500 | High Speed GMLAN Serial Data Bus+ |
| 22 | PNK | 1839 | Ignition 1 Voltage |
| 23-24 | - | - | Not Used |
Rear Wheel Steering Switch (NYS)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| 1 | - | - | Not Used |
| 2 | ORN | 2538 | Brake Pedal Position Sensor Signal |
| 3 | LT BLU | 2568 | Brake Pedal Position Sensor 5V Return |
| 4 | TAN | 2569 | 4 Wheel Steer Mode Indicator Control |
| 5 | BRN/WHT | 230 | Instrument Panel Lamps Dimming Control |
| 6 | BLK | 1050 | Ground |
| 7 | - | - | Not Used |
| 8 | PPL/WHT | 1382 | LED Dimming Signal/LED Dimming Supply |
| 9 | DK GRN/ WHT |
2891 | Rear Wheel Steering Mode Select Swtich Signal |
| 10 | DK BLU | 2544 | Rear Wheel Steer Mode Select Switch 5V Reference |
Steering Wheel Speed/Position Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| 1 | GRY | 1056 | Steering Wheel Position Sensor 5-Volt Reference |
| 2 | BLK | 1835 | Security System Sensor Low Reference |
| 3 | LT GRN | 1763 | Steering Wheel Position Sensor Phase A Signal |
| 4 | LT BLU | 1764 | Steering Wheel Position Sensor Phase B Signal |
| 5 | WHT | 1765 | Steering Wheel Position Marker Pulse Signal |
| 6 | LT BLU | 1059 | Steering Wheel Position Sensor Signal |
| 7 | BRN | 41 | Ignition 3 Voltage |
| 8 | BLK/WHT | 1851 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.