Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE1998EIGHTY-EIGHT V6-3.8L VIN KREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY TRANSMITTERSERVICE AND REPAIRREMOTE ACTIVATION VERIFICATION (RAV) CUSTOMIZATION
1998 Oldsmobile Eighty-Eight V6-3.8L VIN K
Remote Activation Verification (RAV) Customization
1998 Oldsmobile Eighty-Eight V6-3.8L VIN KSECTION Remote Activation Verification (RAV) Customization
The remote activation verification (RAV) provides feedback to the driver that the vehicle has received as the command from the transmitter.
The driver may select the following modes:
Customize the activation feature to each transmitter using the following procedure:
1. Hold the power door lock switch down. The doors lock.
2. Press the TRUNK button on the transmitter. The RAV mode stays in the current mode. The horn chirps.
3. Press the TRUNK button on the transmitter. The RAV mode changes to the next mode. The horn chirps.
4. Release the power door lock switch. The customization mode terminates.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.