Courtesy Lamp

1997 Oldsmobile LSS V6-3.8L VIN KSECTION Courtesy Lamp
Remove or Disconnect

1. Negative battery cable.
2. Lens housing. Using a thin-bladed tool, carefully pry the housing from the trim panel at the forward, top, and bottom sides.
3. Bulb as necessary.
4. Pinch courtesy lamp retainer and pull out lamp socket holder.
5. Courtesy lamp connector.

Install or Connect

1. Courtesy lamp connector.
2. Lamp socket holder.
3. Bulb (if removed).
4. Snap lens housing into trim panel.
5. Negative battery cable.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.