Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE1997LSS V6-3.8L VIN KREPAIR AND DIAGNOSISCRUISE CONTROLBRAKE SWITCH (CRUISE CONTROL)SERVICE AND REPAIRCRUISE CONTROL RELEASE SWITCH AND STOPLAMP SWITCH REPLACEMENT
1997 Oldsmobile LSS V6-3.8L VIN K
Cruise Control Release Switch and Stoplamp Switch Replacement
1997 Oldsmobile LSS V6-3.8L VIN KSECTION Cruise Control Release Switch and Stoplamp Switch Replacement
REMOVE OR DISCONNECT
1. Three electrical connectors.
2. Release switch assembly and stoplamp switch assembly.
INSTALL OR CONNECT
1. Release switch assembly and stoplamp switch assembly.
2. Three electrical connectors.
3. Adjust.
1. Three electrical connectors.
2. Release switch assembly and stoplamp switch assembly.
INSTALL OR CONNECT
1. Release switch assembly and stoplamp switch assembly.
2. Three electrical connectors.
3. Adjust.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.