Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Exploded View
DISASSEMBLY (JAPAN PRODUCTION MODELS)
| Outer socket | Outer socket lock nut | Boot clamp (small diameter) | |||
| Boot | Boot clamp (large diameter) | Hole cover seal | |||
| Gear housing assembly | |||||
| : N.m (kg-m, ft-lb) | |||||
| : Apply Dow Corning 111 or equivalent. | |||||
| : Always replace after every disassembly. | |||||
Never apply the grease to the surface between steering rack and inner socket screw part.
DISASSEMBLY (NORTH AMERICA PRODUCTION MODELS)
| 1. | Outer socket | 2. | Outer socket lock nut | 3. | Boot clamp (small diameter) |
| 4. | Boot | 5. | Boot clamp (large diameter) | 6. | Hole cover seal |
| 7. | Inner socket | 8. | Gear housing assembly | ||
| : N.m (kg-m, ft-lb) | |||||
| : Apply Dow Corning 111 or equivalent. | |||||
| : Always replace after every disassembly. | |||||
Never apply the grease to the surface between steering rack and inner socket screw part.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.