Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2025ROGUE ROCK CREEKREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROL SYSTEM (DTC/CIRCUIT DIAGNOSIS) (3 OF 5)DTC INDEX
2025 Nissan-Datsun Rogue Rock Creek
DTC Index
2025 Nissan-Datsun Rogue Rock CreekSECTION DTC Index
DTC INDEX
| DTC | Description |
|---|---|
| P0443 | EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE |
| P0444 | EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE |
| P0445 | EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE |
| P0446 | EVAP CANISTER VENT CONTROL VALVE |
| P0447 | EVAP CANISTER VENT CONTROL VALVE |
| P0448 | EVAP CANISTER VENT CONTROL VALVE |
| P044A | EGR VOLUME CONTROL VALVE POSITION SENSOR |
| P044B | EGR VOLUME CONTROL VALVE POSITION SENSOR |
| P044C | EGR VOLUME CONTROL VALVE POSITION SENSOR |
| P044D | EGR VOLUME CONTROL VALVE POSITION SENSOR |
| P044E | EGR VOLUME CONTROL VALVE POSITION SENSOR |
| P0450 | EVAP CONTROL SYSTEM PRESSURE SENSOR |
| P0451 | BAROMETRIC PRESSURE SENSOR A/B |
| P0452 | EVAP CONTROL SYSTEM PRESSURE SENSOR |
| P0453 | EVAP CONTROL SYSTEM PRESSURE SENSOR |
| P0454 | EVAP SYSTEM PRESSURE SENSOR |
| P0456 | EVAP CONTROL SYSTEM |
| P0460 | FUEL LEVEL SENSOR |
| P0461 | FUEL LEVEL SENSOR |
| P0462 | FUEL LEVEL SENSOR |
| P0463 | FUEL LEVEL SENSOR |
| P046E | EGR DIFFERENTIAL PRESSURE SENSOR |
| P0486 | EGR DIFFERENTIAL PRESSURE SENSOR |
| P04DB | CRANKCASE VENTILATION SYSTEM |
| P04F1 | EVAP SYSTEM PURGE LINE |
| P04FA | EGR TEMPERATURE |
| P0500 | VSS |
| P0506 | ISC SYSTEM |
| P0507 | ISC SYSTEM |
| P050A | COLD START CONTROL |
| P050B | COLD START CONTROL |
| P050E | COLD START CONTROL |
| P051C | CRANKCASE PRESSURE SENSOR |
| P051D | CRANKCASE PRESSURE SENSOR |
| P0520 | EOP SENSOR |
| P0522 | ENGINE OIL PRESSURE |
| P0523 | ENGINE OIL PRESSURE |
| P0524 | ENGINE OIL PRESSURE |
| P052A | INTAKE VALVE TIMING CONTROL |
| P052B | INTAKE VALVE TIMING CONTROL |
| P052E | CRANKCASE VENTILATION VALVE |
| P0531 | A/C REFRIGERANT PRESSURE SENSOR |
| P0532 | A/C REFRIGERANT PRESSURE SENSOR |
| P0533 | A/C REFRIGERANT PRESSURE SENSOR |
| P053E | CRANKCASE PRESSURE SENSOR |
| P054A | CAMSHAFT POSITION BANK 1 |
| P054B | CAMSHAFT POSITION BANK 1 |
| P055F | ENGINE OIL PRESSURE |
| P0560 | SUB STARTER and GENERATOR |
| P0561 | SUB STARTER and GENERATOR |
| P0562 | SUB STARTER and GENERATOR |
| P0573 | BRAKE PEDAL SWITCH A |
| P059F | ACTIVE GRILLE SHUTTER |
| P05D8 | CRANKCASE PRESSURE SENSOR |
| P05D9 | CRANKCASE VENTILATION VALVE |
| P05DA | CRANKCASE VENTILATION VALVE |
| P05EC | COLD START CONTROL |
| P0604 | ECM |
| P0605 | ECM |
| P0606 | ECM |
| P0607 | ECM |
| P060A | ECM |
| P060B | ECM |
| P060C | ECM |
| P061B | ECM |
| P062B | ECM |
| P062D | FUEL INJECTOR DRIVER BANK 1 |
| P062F | ECM |
| P0641 | SENSOR POWER SUPPLY |
| P064A | FUEL PUMP CONTROL MODULE |
| P064D | ECM |
| P06B0 | SENSOR POWER SUPPLY 1 |
| P06B3 | SENSOR POWER SUPPLY 2 |
| P06DA | ENGINE OIL PRESSURE CONTROL SOLENOID VALVE |
| P06DB | ENGINE OIL PRESSURE CONTROL SOLENOID VALVE |
| P06DC | ENGINE OIL PRESSURE CONTROL SOLENOID VALVE |
| P06E6 | INTERNAL CONTROL MODULE |
| P0719 | BRAKE PEDAL SWITCH B |
| P0850 | PNP SWITCH |
| P0A1E | SUB STARTER and GENERATOR |
| P1096 | HUMIDITY TEMPERATURE SENSOR |
| P1097 | HUMIDITY TEMPERATURE SENSOR |
| P1098 | HUMIDITY TEMPERATURE SENSOR |
| P1099 | HUMIDITY TEMPERATURE SENSOR |
| P10C8 | INTERNAL CONTROL MODULE FUEL INJECTOR |
| P10C9 | INTERNAL CONTROL MODULE FUEL INJECTOR |
| P10CA | INTERNAL CONTROL MODULE FUEL INJECTOR |
| P1148 | CLOSED LOOP CONTROL |
| P1197 | OUT OF GAS |
| P119A | FUEL RAIL PRESSURE SENSOR |
| P119B | FUEL RAIL PRESSURE SENSOR |
| P119C | FUEL RAIL PRESSURE SENSOR |
| P119D | FRP SENSOR |
| P119E | FRP SENSOR |
| P11A0 | VCR CONTROL MODULE |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.