Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2025ROGUE ROCK CREEKREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROL SYSTEM (DTC/CIRCUIT DIAGNOSIS) (1 OF 5)DTC INDEX
2025 Nissan-Datsun Rogue Rock Creek
DTC Index
2025 Nissan-Datsun Rogue Rock CreekSECTION DTC Index
DTC INDEX
| DTC | Description |
|---|---|
| B3A70 | INTELLIGENT BATTERY SENSOR |
| B3A71 | INTELLIGENT BATTERY SENSOR |
| B3A72 | INTELLIGENT BATTERY SENSOR |
| B3A73 | INTELLIGENT BATTERY SENSOR |
| B3A74 | INTELLIGENT BATTERY SENSOR |
| B3A75 | INTELLIGENT BATTERY SENSOR |
| C0069 | G SENSOR |
| C0500 | WHEEL SPEED SENSOR |
| C0501 | WHEEL SPEED SENSOR |
| C0502 | WHEEL SPEED SENSOR |
| C0503 | WHEEL SPEED SENSOR |
| C0505 | WHEEL SPEED SENSOR |
| C0506 | WHEEL SPEED SENSOR |
| C0507 | WHEEL SPEED SENSOR |
| C0508 | WHEEL SPEED SENSOR |
| C0509 | WHEEL SPEED SENSOR |
| C050B | WHEEL SPEED SENSOR |
| C050C | WHEEL SPEED SENSOR |
| C050D | WHEEL SPEED SENSOR |
| C050E | WHEEL SPEED SENSOR |
| C050F | WHEEL SPEED SENSOR |
| C0511 | WHEEL SPEED SENSOR |
| C0512 | WHEEL SPEED SENSOR |
| C0513 | WHEEL SPEED SENSOR |
| C0514 | WHEEL SPEED SENSOR |
| C0515 | WHEEL SPEED SENSOR |
| C0517 | WHEEL SPEED SENSOR |
| C053C | WHEEL SPEED SENSOR |
| C0552 | G SENSOR |
| P0010 | INTAKE VALVE TIMING CONTROL |
| P0011 | IVT CONTROL |
| P0012 | INTAKE VALVE TIMING CONTROL |
| P0014 | EVT CONTROL |
| P0015 | EXHAUST VALVE TIMING CONTROL |
| P0016 | INTAKE VALVE TIMING CONTROL |
| P0017 | EXHAUST VALVE TIMING CONTROL |
| P0030 | A/F SENSOR 1 HEATER |
| P0031 | A/F SENSOR 1 HEATER |
| P0032 | A/F SENSOR 1 HEATER |
| P0036 | HO2S2 HEATER |
| P0037 | HO2S2 HEATER |
| P0038 | HO2S2 HEATER |
| P0046 | WASTEGATE CONTROL MOTOR |
| P0053 | A/F SENSOR 1 HEATER |
| P0078 | EVT CONTROL SOLENOID VALVE |
| P0079 | EVT CONTROL SOLENOID VALVE |
| P0080 | EVT CONTROL SOLENOID VALVE |
| P0087 | FRP CONTROL SYSTEM |
| P0088 | FRP CONTROL SYSTEM |
| P0090 | FRP SYSTEM |
| P0091 | FUEL RAIL PRESSURE CONTROL SYSTEM |
| P0092 | FUEL RAIL PRESSURE CONTROL SYSTEM |
| P0096 | IAT SENSOR 2 |
| P0097 | IAT SENSOR 2 |
| P0098 | IAT SENSOR 2 |
| P00B3 | ENGINE COOLANT TEMPERATURE SENSOR 2 |
| P00B4 | ENGINE COOLANT TEMPERATURE SENSOR 2 |
| P00C0 | TURBOCHARGER BYPASS CONTROL VALVE |
| P00C1 | TURBOCHARGER BYPASS CONTROL VALVE |
| P00C2 | TURBOCHARGER BYPASS CONTROL VALVE |
| P00D2 | HO2S2 HEATER |
| P00DE | CHARGE AIR COOLER COOLANT TEMPERATURE SENSOR |
| P00E0 | CHARGE AIR COOLER COOLANT TEMPERATURE SENSOR |
| P00E1 | CHARGE AIR COOLER COOLANT TEMPERATURE SENSOR |
| P00F2 | MAF SENSOR |
| P00F3 | MAF SENSOR |
| P00F4 | MAF SENSOR |
| P00F5 | MAF SENSOR |
| P00FE | EVAP CONTROL SYSTEM |
| P0101 | MAF SENSOR |
| P0103 | MAF SENSOR |
| P0106 | MANIFOLD ABSOLUTE PRESSURE SENSOR |
| P0107 | BAROMETRIC PRESSURE SENSOR |
| P0108 | BAROMETRIC PRESSURE SENSOR |
| P0111 | IAT SENSOR |
| P0112 | IAT SENSOR |
| P0113 | IAT SENSOR |
| P0116 | ECT SENSOR |
| P0117 | ECT SENSOR |
| P0118 | ECT SENSOR |
| P0122 | TP SENSOR |
| P0123 | TP SENSOR |
| P0125 | ECT SENSOR |
| P0127 | IAT SENSOR |
| P0128 | THERMOSTAT FUNCTION |
| P0130 | A/F SENSOR 1 |
| P0131 | A/F SENSOR 1 |
| P0132 | A/F SENSOR 1 |
| P0136 | O2 SENSOR 2 BANK 1 |
| P0137 | HO2S2 |
| P0138 | HO2S2 |
| P0139 | HO2S2 |
| P014C | A/F SENSOR 1 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.