Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Switch Name and Function
SWITCHES AND INDICATORS
| 1. | Stop/start indicator | 2. | Stop/start OFF switch |
| A. | On the information display | B. | Lower instrument panel (driver side) |
SYSTEM CONTROL CONDITION DISPLAY
Stop/start Indicator Status (Information Display)
| System condition | Vehicle condition | Warning chime | Stop/start indicator | |
|---|---|---|---|---|
| The engine does not restart | With intelligent key system | Hood open *1 | Sound | |
| The stop/start system is OFF | When the stop/start OFF switch is ON. *2 | - | ||
| When the brake pedal is not enough pressure. | - | |||
| When A/C is prioritized. | - | |||
| When the steering wheel is being operated. | - | |||
| Others | - | - | ||
| The stop/start system is ON. | When the stop/start OFF switch is OFF. *3 | - | ||
| Fail-Safe | Malfunction of stop/start system | - | ||
*1: Engine is stalled after alert for 1.5 seconds.
*2: This is indicated only for 1.5 seconds after the stop/start OFF switch is turned from OFF to ON.
*3: This is indicated only for 1.5 seconds after the stop/start OFF switch is turned from ON to OFF.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.