Quick Lookups: Fluids

2025 Nissan-Datsun Armada Platinum, 4WDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.10 OZS. 0.15 L ND-OIL12 (PAG) S
Air Cond Refrigerant 2.32 LBS. 1.05 KG HFO-1234yf (R-1234yf) S
Automatic Transmission Fluid 10.57 QTS. 10 L Genuine NISSAN Automatic Transmission Fluid Matic P S
Brake Fluid N/A N/A Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 Approximate capacity. S
Differential Gear Oil Front 0.90 QTS. 0.85 L Genuine NISSAN Differential Oil Hypoid Super GL-5, SAE 80W-90 or equivalent conventional (non-synthetic) oil S
Differential Gear Oil Rear,R240 (DL) 2.00 QTS. 1.89 L Genuine NISSAN Hypoid Super-S1 GL-5 SAE 75W-80 or equivalent S
Differential Gear Oil Rear,R240 2.11 QTS. 1.99 L Genuine NISSAN Hypoid Super-S1 GL-5 SAE 75W-80 or equivalent S
Engine Coolant w/Reservoir 13.75 QTS. 13.01 L Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (Blue) or equivalent Approximate capacity. S
Engine Oil Drain and Refill,w/Filter 6.35 QTS. 6 L Genuine NISSAN Motor Oil SP SAE 0W-20 Engine Oil If SAE 0W-20 motor oil (or engine oil) is not available, a synthetic SAE 0W-20 GF-6A SP motor oil (or engine oil) may be used. S
Engine Oil Drain and Refill,w/o Filter 5.92 QTS. 5.6 L Genuine NISSAN Motor Oil SP SAE 0W-20 Engine Oil If SAE 0W-20 motor oil (or engine oil) is not available, a synthetic SAE 0W-20 GF-6A SP motor oil (or engine oil) may be used. S
Engine Oil Overhaul 7.61 QTS. 7.2 L Genuine NISSAN Motor Oil SP SAE 0W-20 Engine Oil If SAE 0W-20 motor oil (or engine oil) is not available, a synthetic SAE 0W-20 GF-6A SP motor oil (or engine oil) may be used. S
Transfer Case Fluid 1.90 QTS. 1.79 L Genuine NISSAN Transfer Case Fluid LV Using transfer fluid other than Genuine NISSAN Transfer Fluid LV will damage the transfer, which is not covered by the NISSAN New Vehicle Limited Warranty. S
Windshield Washer Fluid 4.75 QTS. 4.49 L Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.