Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER L4-2.4L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMBRAKE ROTOR/DISC
2005 Mitsubishi Lancer L4-2.4L SOHC
Brake Rotor/Disc
2005 Mitsubishi Lancer L4-2.4L SOHCSECTION Brake Rotor/Disc
Disc brake disc thickness
Standard value:
Minimum limit:
Disc brake disc run-out
Limit: Rear 0.04 mm (0.0015 inch)
Limit: Front 0.06 mm (0.0024 inch)
Front disc brake drags force
Standard Value 78 N (18 lbs.) or less
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.