Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER L4-2.4L SOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTRANSMISSION CONTROL SYSTEMSTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGLEARNED VALUE INITIALIZATION PROCEDURE
2005 Mitsubishi Lancer L4-2.4L SOHC
Learned Value Initialization Procedure
2005 Mitsubishi Lancer L4-2.4L SOHCSECTION Learned Value Initialization Procedure
HOW TO INITIALIZE A/T LEARNING VALUE
INITIALIZATION PROCEDURE
1. Shift the selector lever to the P range and turn the ignition switch to the LOCK (OFF) position. Then, connect the MUT-III to the diagnosis connector.
2. Initialize the learned value on the initialization screen.
3. After this initialization, make the system learn the idling in accordance with "Learning procedure for idling in MPI engine".
INITIALIZATION PROCEDURE
1. Shift the selector lever to the P range and turn the ignition switch to the LOCK (OFF) position. Then, connect the MUT-III to the diagnosis connector.
2. Initialize the learned value on the initialization screen.
3. After this initialization, make the system learn the idling in accordance with "Learning procedure for idling in MPI engine".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.