Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER L4-2.4L SOHCREPAIR AND DIAGNOSISMAINTENANCEFLUIDSFLUID - M/TTESTING AND INSPECTION
2005 Mitsubishi Lancer L4-2.4L SOHC
Fluid - M/T: Testing and Inspection
2005 Mitsubishi Lancer L4-2.4L SOHCSECTION Testing and Inspection
MANUAL TRANSMISSION OIL CHECK
1. Remove the filler plug.
2. Check that the oil level is up to the lower edge of the filler plug hole.
3. Check that the oil is not noticeably dirty, and that it has a suitable viscosity.
4. Tighten the filler plug to the specified torque.
Tightening torque: 32 Nm (24 ft. lbs.)
1. Remove the filler plug.
2. Check that the oil level is up to the lower edge of the filler plug hole.
3. Check that the oil is not noticeably dirty, and that it has a suitable viscosity.
4. Tighten the filler plug to the specified torque.
Tightening torque: 32 Nm (24 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.