Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER L4-2.4L SOHCREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONSFRONT WHEEL ALIGNMENT
2005 Mitsubishi Lancer L4-2.4L SOHC
Front Wheel Alignment
2005 Mitsubishi Lancer L4-2.4L SOHCSECTION Front Wheel Alignment
ALIGNMENT SPECIFICATIONS
Toe-in 1 ± 2 mm (0.04 ± 0.07 inch)
Steering Angle
Inner Wheel
Vehicles with 14-inch wheels 40°40' ± 1°30'
Vehicles with 15-inch wheels 39°30' ± 1°30'
Vehicles with 16-inch wheels 33°40' +1°00'/-2°00'
Outer Wheel (reference)
Vehicles with 14-inch wheels 33°20'
Vehicles with 15-inch wheels 32°30'
Vehicles with 16-inch wheels 28°46'
Camber
Vehicles with 14-inch wheels
Left/right deviation within 30' 0°00' ± 30'
Vehicles with 15-inch wheels
Left/right deviation within 30' 0°05' ± 30'
Vehicles with 16-inch wheels
Left/right deviation within 30' -0°05' ± 30'
Caster
Vehicles with 14-inch wheels
Left/right deviation within 30' 2°55' ± 30'
Vehicles with 15-inch wheels
Left/right deviation within 30' 2°45' ± 30'
Vehicles with 16-inch wheels
Left/right deviation within 30' 2°55' ± 30'
Kingpin inclination
Vehicles with 14-inch wheels 12°40' ± 1°30'
Vehicles with 15-inch wheels 12°30' ± 1°30'
Vehicles with 16-inch wheels 12°40' ± 1°30'
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.