Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER L4-2.0L SOHCREPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMSPECIFICATIONS
2005 Mitsubishi Lancer L4-2.0L SOHC
Starting System: Specifications
2005 Mitsubishi Lancer L4-2.0L SOHCSECTION Specifications
FASTENER TIGHTENING SPECIFICATIONS
Starting system
ITEM SPECIFICATION
Magnetic switch screw 5.8 ± 1.6 N.m (52 ± 14 in-lb)
Rear bracket screw 3.4 ± 1.0 N.m (30 ± 9 in-lb)
Starter bolt 30 ± 3 N.m (23 ± 2 ft-lb)
Stator screw 5.8 ± 1.6 N.m (52 ± 14 in-lb)
Starting system
ITEM SPECIFICATION
Magnetic switch screw 5.8 ± 1.6 N.m (52 ± 14 in-lb)
Rear bracket screw 3.4 ± 1.0 N.m (30 ± 9 in-lb)
Starter bolt 30 ± 3 N.m (23 ± 2 ft-lb)
Stator screw 5.8 ± 1.6 N.m (52 ± 14 in-lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.