Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER L4-2.0L SOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTRANSMISSION CONTROL SYSTEMSTESTING AND INSPECTIONCOMPONENT TESTS AND GENERAL DIAGNOSTICSTRANSMISSION FLUID TEMPERATURE SENSOR CHECK
2005 Mitsubishi Lancer L4-2.0L SOHC
Transmission Fluid Temperature Sensor Check
2005 Mitsubishi Lancer L4-2.0L SOHCSECTION Transmission Fluid Temperature Sensor Check
TRANSMISSION FLUID TEMPERATURE SENSOR CHECK
1. Remove the transmission fluid temperature sensor.

2. Measure the resistance between terminals 1 and 2 of the transmission fluid temperature sensor connector.

Standard value
3. If the transmission fluid temperature sensor resistance is outside the specified range, replace the transmission fluid temperature sensor.
1. Remove the transmission fluid temperature sensor.
2. Measure the resistance between terminals 1 and 2 of the transmission fluid temperature sensor connector.
Standard value
3. If the transmission fluid temperature sensor resistance is outside the specified range, replace the transmission fluid temperature sensor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.