Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER EVOLUTION L4-2.0L DOHC TURBOREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSPOWER WINDOW SWITCHTESTING AND INSPECTION
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC Turbo
Power Window Switch: Testing and Inspection
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC TurboSECTION Testing and Inspection
Power Window Switch Continuity Check
POWER WINDOW MAIN SWITCH'S FRONT [LH] SWITCH CHECK
Connect the terminal number 13 to the battery (+) post, and the terminal number 12 to the battery (-) post. MAIN SWITCH
Power Window Main Switch:
Power Window Sub Switch:
POWER WINDOW MAIN SWITCH'S FRONT [LH] SWITCH CHECK
Connect the terminal number 13 to the battery (+) post, and the terminal number 12 to the battery (-) post. MAIN SWITCH
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.